Safe Surface is specially formulated to destroy both bacteria and viruses (including coronavirus) for up to 5 hours on a variety of surfaces such as handles, handrails, doors, tables and desks, and other areas of frequent contact, with just one single coating.

Active biocides present in the formulation provide a longer lasting protection than alcohol based preparations.

It does not stain, is non corrosive and will give a streak and smeer free finish to most polished surfaces including glass and stainless steel.

Being Alcohol free means it is safe to use on the skin with no drying or irritation of the skin

Safe Surface has been tested to BS EN 1276 which is the European standard for the bacterial activity of chemical disinfectants, and provides proof of efficacy in the control of harmful micro-organisms. In order to meet the standard, products are tested by an independent laboratory, and must denature 99.999% within 5 minutes.

Also tested to BS EN 14476 which is a viricidal quantitative suspension test for chemical disinfectants.

Aerosol Application: Clean and wipe the surface, then spray from a distance of 20cm to 40cm

Handling and Storage: Avoid spillage, keep away from heat, sparks and open flames. Use in well ventilated areas. For best results the product should be used at temperatures between 15C and 25C.

SAFE SURFACE needs to be stored between 10C and 20C, in a dry and well ventilated area, and must not be exposed to direct sunlight or temperatures above 50C

• Safety Data Sheet (Safe_Surface.pdf, 691 Kb) [Download]